Normal mode

The operator guarantees the safety of the area where the drone will operate.
The lane must be clear on the ground, and no one must circulate in the area.

Standard mission

• Place the terminals on either side of the drone (see diagram below). The bollards must be at a minimum distance of 3.5m from the drone, spaced at least 25m, and at most 50m…
• The operator must always be close to the green terminal; if the control of the tablet is lost (breakage, battery), turn off the green terminal and the drone will land.
• Place and switch on the drone in front of the first desired column about 1m from the pallet
• Launch the EYESEE application on the tablet. Check in the tablet parameters that the front regulation distance is 78cm.
• Select the desired flight plan (mapping) and mission; create the mission if necessary. Check that the drone is properly positioned in the aisle corresponding to the mission generated.
• If everything is ok, launch the drone (press and hold the takeoff button)
• If something seems abnormal (vibration, strange noise…) press the landing button
• Verify that the drone is correctly performing its mission and scanning the codes.
• Make it land
• Turn off the drone quickly

Mission close to a wall

If the configuration cannot respect a safety distance of 3.5 meters between the bollard and the drone for take-off and landing, another configuration can be set up: the drone flies outside the tags.